Ultra-Low Phase Noise 10.24 GHz Oscillator
Ultra-Low Phase Noise 10.24 GHz Oscillator TRISLCO-10240
The TRISLCO-10240 is a high performance microwave oscillator which provides a low phase noise 10.24 GHz reference signal locked to a built-in high stability 10 MHz OCXO. The oscillator is built around an oven controlled high Q sapphire resonator with an ultra-low phase noise HBT sustaining amplifier. The oscillator provides more than +10 dBm of output power, comes in a rugged and relatively compact form factor and operates over the frequency range of 0…+40°C. It does require a heat sink or an external cooler to achieve and maintain a thermal balance.
PERFORMANCE CHARACTERISTICS
Output Frequency 10.24 GHz Warm-up Time to Achieve the Frequency Lock <30 min. Short-term Frequency Stability (Allan Deviation)
per 1 sec±2E-12 Frequency Stability in the Temperature Range 0...+50°C ±1E-11 Aging ±1E-8/year Output Power +10 dBm (+13 dBm typ.) Output Waveform sinusoidal Output Impedance 50 Ohm Output VSWR <2:1 Harmonics <-30 dBc Discrete Spurious Tones <-30 - 20log (Fm) dBc; Fm <500 kHz SSB Phase Noise PerformanceFrequency offset FmSSB Phase noiseGuaranteed ValuesTypical Values1 Hz-40 dBc/Hz-50 dBc/Hz10 Hz-50 dBc/Hz-60 dBc/Hz100 Hz-90 dBc/Hz-95 dBc/Hz1 kHz-120 dBc/Hz-125 dBc/Hz10 kHz-150 dBc/Hz-155 dBc/Hz100 kHz-165 dBc/Hz-170 dBc/Hz1 MHz-170 dBc/Hz-175 dBc/Hz Typical SSB Phase Noise Plot 
Power Supply Voltage +12 V Current Consumption 2500 mA (during warm-up)
<1500 mA (after warm-up)Operating Temperature Range 0...+40ºC Dimensions Milled Aluminum Case 215 mm x 130 mm x 60 mm
